Assign First usable IP addresses for the Gigabit Ethernet…

/in /by

Question Answered step-by-step Assign First usable IP addresses for the Gigabit Ethernet… Image transcription textX< R2 S0/1/0 SO/1/1 Extended ACLs are usually Standard ACLs are usually placed near the source. placednear the destination. SO/1/0 SO/1/1 RT R3 GO/0/0 GO/0/1 GO/0/0 GO/0/1 192.168.10.0/24 192.168.30.0/24192.168.31.0/24 S1 S2 S3 S4 192.168.11.0/24 PC1 PC2 PC3 192.168.10.10 192.168.11.10 192.168.30.12 192.168.31.12... Show moreAssign First usable IP addresses for the Gigabit Ethernet interfaces of the Router R1 and R3Assign First usable IP address of 172.22.16.248/ 30 to R1 router Serial Interface (S0/1/0)Assign 2nd   usable IP address of 172.22.16.248/ 30 to R2 router Serial Interface (S0/1/0)Assign First usable IP address of 172.22.16.240/ 30 to R3 router Serial Interface (S0/1/1Assign 2nd  usable IP address of 172.22.16.240/ 30 to R2 router Serial Interface (S0/1/1)Assign IP address and Gateway to PC1, PC2 and PC3Enable OSPF Enable Single area OSPF with process ID 1 & area 10 for R1Enable Single area OSPF with Process ID 1 &  area 10 for R2Enable Single area OSPF with Process ID & area 10 for R3 Create s an access list Create standard access- list to deny any traffic from host 192.168.11.10 /24 to 192.168.30.0 but permit any other traffic from 192.168.11.0 /24 & 192.168.10.0 (Use Summary route) to 192.168.30.0 / 24.  Computer Science Engineering & Technology Networking CS 12 Share QuestionEmailCopy link Comments (0)