A box of mass 50 kg is dragged on a horizontal floor by means of a rope tied to its front. If the coefficient of kinetic friction between the floor and the box is 0.30, what is the force required to move the box at uniform speed?

/in /by

A box of mass 50 kg is dragged on a horizontal floor by means of a rope tied to its front.

If the coefficient of kinetic friction between the floor and the box is 0.30, what is the force required to move the box at uniform speed?

You might also like
A block and tackle system has 3 pulleys in the upper fixed block and two in the lower moveable block. What load can be lifted by an effort of 200 N if the efficiency of the machine is 60%?
A current of 2m A flows through a conductor of resistance 2 kΩ. Calculate the voltage across the conductor.
A gas in a cylinder occupies a volume of 465 ml when at a pressure equivalent to 725 mm of mercury. If the temperature is held constant, what will be the volume of the gas when the pressure on it is raised to 825 mm of mercury?
A minibus of mass 1,500 kg travelling at a constant velocity of 72 km/h collides head-on with a stationary car of mass 900 kg. The impact takes 2 seconds before the two move together at a constant velocity for 20 seconds. Calculate a) The common velocity b) The distance moved after the impact c) The impulsive force d) The change in kinetic energy
A metal cylinder mass 0.5 kg is heated electrically. If the voltmeter reads 15V, the ammeter 0.3A and the temperatures of the block rises from 20 0C to 85 0C in ten minutes. Calculate the specific heat capacity of the metal cylinder.
Figure 5 shows a graph of current against voltage for a semiconductor diode. In the space provided, draw a circuit diagram that may be used to obtain values needed to draw the graph in figure 5
A spring constant k = 100 Nm is stretched to a distance of 20 cm. calculate the work done by the spring.
State (i) What is meant by smoothing,